Santest GYSE-S-PF Series Profile Type Contactless Linear Scale

Santest GYSE-S-PF Probe

SSI output (detachable probe element)

This is the linear profile version of GYSE-S. GYSE-S probe outputs displacement of the magnet as SSI (Synchronous Serial Interface). SSI is output of a serial communication-type and outputs the position data of 24bit. When using SSPC-02 of separate sale, you can convert SSI to parallel data. So you can get the data in the I/O unit. The inside probe element can be detached from the outer housing, and with the captive software (GPM), zero and gain adjustment is possible at user side.

Specifications

ACCURACY
Non-linearity	≦±0.025%FS TYP
Resolution	0.1mm～0.001mm specified
Repeatability	≦±0.001%FS （Min. ±3μm）
Temp. drift	≦±15ppmFS/℃
OUTPUT
Position (STD)	SSI（Synchronized Serial Interface), 24～27bit, Binary(STD) or Gray
Velocity (option)	not available
Alarm	Open drain 50V 0.1A (for magnet missing)
Power supply	+24(±2)VDC (70mA）
Sampling freq.	Std 1kHz（total b Sampling freq. ody length:up to 1250mm）
ENVIRONMENT
Operating temp.	-20℃～+75℃
Storage temp.	-40℃～+75℃
Vibration	15G（20～100Hz）
Shock	100G（2msec)
IP grade	IP65

• The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
• The specification of stroke less than 300mm is equal that of stroke 300mm.

* Sampling frequency : Max. 3.75kHz (It depends on the total body length (shows in Model ⑨), and the consumption current increases. )