0216 519 47 90
Santest GYSE-S Probe
SSI Output
(detachable probe element)
GYSE-S probe outputs displacement of the magnet as SSI (Synchronous Serial Interface). SSI is output of a serial communication-type and outputs the position data of 24bit. When using SSPC-02 of separate sale, you can convert SSI to parallel data. So you can get the data in the I/O unit. The inside probe element can be detached from the outer housing, and with the captive software (GPM), zero and gain adjustment is possible at user side.
Specifications
| ACCURACY | ||||||
| Non-linearity | ≦±0.025%FS TYP | |||||
| Resolution | 0.1mm～0.001mm | |||||
| Repeatability | ≦±0.001%FS (Min. ±3μm） | |||||
| Temp. drift | ≦±15ppmFS/℃ | |||||
| OUTPUT | ||||||
| Position (STD) | SSI（Synchronized Serial Interface), 24～27bit, Binary(STD) or Gray | |||||
| Velocity(Option) | not available | |||||
| Alarm | Open drain 50V 0.1A （for lost magnet） | |||||
| Power supply | +24(±2)VDC（70mA） | |||||
| Sampling freq. * | Std 1kHz (total rod length : up to 1250mm) | |||||
| ENVIRONMENT | ||||||
| Max. Pressure | 35MPa（probe rod） | |||||
| Operating temp. | -20℃～+75℃ | |||||
| Storage temp. | -40℃～+75℃ | |||||
| Vibration | 15G（20～100Hz） | |||||
| Shock | 100G（2msec） | |||||
| IP grade | IP67 |
- The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
- The specification of stroke less than 300mm is equal that of stroke 300mm.
* Sampling frequency: Max. 3.75kHz (It depends on the total rod length (shows in Model ⑩), and the consumption current increases.)
