0216 519 47 90
Santest GYcAT4 Probe
Analog Output
(Replacement model for GYLT, GYLS)
Replacement model for GYLS (0-10V) or GYLT (4-20mA). The linearity is changed to 0.05%FS from 0.025%FS, so please be careful. GYcAT4 doesn’t have alarm output. Please consider GYcAT (page 16-17) in a new inquiry. By the option, it is available with the high speed sampling, and high temperature (rod parts only).
Specifications
| ACCURACY | ||||||
| Non-linearity | ≦±0.05%FS TYP | |||||
| Resolution | ≦0.01%FS | |||||
| Repeatability | ≦±0.01%FS | |||||
| Temp. drift | ≦±40ppmFS/℃ | |||||
| OUTPUT | ||||||
| Voltage output | 0～10V or 10～0V (output current：Max.5mA, load：Min.2kΩ） |
|||||
| Current output | 4～20m or 20～4mA (load：Max.500Ω） |
|||||
| Alarm output | not available | |||||
| Power supply | +24(±2)VDC (100mA） | |||||
| Sampling freq. * | Std 1kHz（total rod length: up to 1250mm） | |||||
| ENVIRONMENT | ||||||
| Max. Pressure | 35MPa（probe rod） | |||||
| Operating temp. | -20℃～+80℃ | |||||
| Storage temp. | -40℃～+80℃ | |||||
| Vibration | 6G（or 40Hz 2mmPP） | |||||
| Shock | 50G（2msec） | |||||
| IP grade | IP67（10kPa, 30min） |
- The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
- The specification of stroke less than 300mm is equal that of stroke 300mm.
* Sampling frequency: Max. 8kHz (It depends on the total rod length (shows in Model ⑧), and the consumption current increases. )
