0216 519 47 90
Santest GYcAT Probe
Standard Analog Output
You can get a voltage or current analog signal proportional to magnet position only by applying a 24VDC power supply directly to GYcAT. It has alarm output and is equipped with noise cancellation functions. By the option, it is available with the high speed sampling, SRT, and high temperature (rod parts only).
Specifications
| ACCURACY | ||||||
| Non-linearity | ≦±0.05%FS TYP | |||||
| Resolution | ≦0.01%FS | |||||
| Repeatability | ≦±0.01%FS | |||||
| Temp. drift | ≦±40ppmFS/℃ | |||||
| OUTPUT | ||||||
| Voltage output | 0～10V or 10～0V (output current：Max.5mA, load：Min.2kΩ） |
|||||
| Current output | 4～20m or 20～4mA (load：Max.500Ω） |
|||||
| Alarm output | Open collector 30V 0.1A | |||||
| Power supply | +24(±2)VDC (50mA） | |||||
| Sampling freq. * | Std 1kHz（total rod length: up to 1250mm） | |||||
| ENVIRONMENT | ||||||
| Max. Pressure | 35MPa（probe rod） | |||||
| Operating temp. | -20℃～+80℃ | |||||
| Storage temp. | -40℃～+80℃ | |||||
| Vibration | 6G（or 40Hz 2mmPP） | |||||
| Shock | 50G（2msec） | |||||
| IP grade | IP67（10kPa, 30min） |
- The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
- The specification of stroke less than 300mm is equal that of stroke 300mm.
* Sampling frequency: Max. 8kHz (It depends on the total rod length (shows in Model ⑧), and the consumption current increases. )
